Is the ELE SPI2436V120-500 a 24V battery inverter?

Yes. The supplied brochure lists a 24V nominal platform, 28.8Vdc rated battery voltage and a 20-33Vdc battery voltage range. Exact battery and BMS compatibility still requires confirmation.

Can the ELE SPI2436V120-500 operate in parallel?

No. The supplied brochure lists parallel units as not supported for this model.

What PV input is documented for the ELE SPI2436V120-500?

The brochure lists 6000W maximum DC input power, 500V maximum DC input voltage, a 90-500V PV input range, a 90-450V MPPT range and one MPPT channel with 27A maximum input current.

Does the ELE SPI2436V120-500 provide backup transfer?

The brochure lists a typical transfer time of 10 milliseconds and peak output of 7200VA for 5 seconds. The final load and surge design must be checked for the project.

EU series · residential hybrid inverter

ELE SPI2436V120-5003.6kW control on a 24V battery platform.

Documented for 230Vac single-phase residential systems with 6kW maximum DC input, one 27A MPPT channel and battery-less operating capability.

Request model datasheet →Review specifications ↓

EU seriesSingle-phase24V batteryNo parallel

Representative white ELECNO residential hybrid inverter family housing

PV input6kW500V maximum DC voltage

Battery24V20-33Vdc operating range

Family visual · confirm image and current document revision for the exact supplied unit

3.6kWRated AC output

230VacSingle-phase output

1 × 27AMPPT channel

10msTypical transfer

Selection answer

A compact model with clear electrical boundaries.

The model fits a documented 230Vac single-phase branch where a 24V battery platform and 3.6kW rated output are appropriate. It is not the right choice when the design requires parallel inverter expansion.

Start with the AC service

Rated output is 230Vac, single-phase, L+N+PE at 50/60Hz.

Confirm country and grid rules

Check the battery window

The brochure lists 20-33Vdc and lead-acid or lithium battery types.

Nominal voltage is not enough

Keep PV inside limits

Maximum DC input is 6kW; PV Voc must remain below 500V.

Cold-weather Voc controls

Do not design a parallel bank

Parallel units are explicitly listed as not supported for this model.

Select another documented model

Documented operating paths

Solar, battery, grid and backup are one coordinated system.

The brochure lists on-grid, off-grid and battery-less operating capability. The final wiring, protection and operating mode must follow the current installation documentation.

System overviewELE SPI2436V120-500

01 / Solar input

PV array

90-500V input range

90-450V MPPT range

PV → inverter

02 / Energy conversion

Hybrid inverter

ELE SPI2436V120-500

Representative ELECNO inverter family housing

3600Wrated output

7200VA peak for 5s

Family visual · exact unit may vary

03 / Energy storage

24V battery

120A max charge

140A max discharge

Battery ↔ inverter

04 / AC connection

Loads / grid

230Vac single-phase

10ms typical transfer

Grid input · load output

Functional overview, not an installation wiring diagram. Follow the model-specific manual for terminal assignments and protection.

Model specification

Every published value tied to one model.

Values below are transcribed from the supplied July 2026 neutral brochure. Confirm the latest datasheet revision before procurement, string design or installation.

DC input / PV

Maximum DC input power: 6000W
Maximum DC input voltage: 500V
Start voltage: 120V
PV input voltage range: 90-500V
MPPT voltage range: 90-450V
MPPT channels: 1
Maximum MPPT input current: 27A
Maximum PV charging current: 120A

AC input and output

AC input range: 170-280Vac
Input frequency range: 47-55Hz / 57-65Hz
Maximum AC input current: 30Aac
Maximum AC charge current: 80Adc
Rated AC output power: 3600W
Maximum AC output power: 3600VA
Peak power / duration: 7200VA / 5s
Rated output voltage: 230Vac
Output frequency: 50/60Hz
Connection: L+N+PE

Battery parameters

Rated battery voltage: 28.8Vdc
Minimum start voltage: 22V
Battery voltage range: 20-33Vdc
Battery type: Lead-acid / lithium
Maximum charge / discharge: 120A / 140A
Charge voltage range: 20-33Vdc
Battery-less operation: Yes
PV / grid battery activation: Listed feature

General data

Dimensions (W × D × H): 428 × 280 × 110mm
Weight: 8.2kg
Operating temperature: -10°C to 55°C
Derating: Above 45°C
Storage temperature: -25°C to 60°C
Humidity range: 5%-95%
Cooling: Forced air, variable speed
Protection class: IP21
Noise: ≤60dB

Protection and transfer

Grid overload protection: Circuit breaker
Grid breaker rating: 30A
AC reverse feed protection: Yes
Battery short-circuit protection: Fuse
AC output short-circuit protection: Yes
Wiring protection: Yes
Transfer time: 10ms typical
CT anti-backflow: Yes

Interfaces and limits

Communication ports: USB / RS485 / Wi-Fi
Dry contact control: Yes
Remote diagnostics / OTA: Yes
Parallel units: Not supported
Maximum altitude: 4000m
No-derating altitude: ≤2000m
Maximum efficiency: >93% battery to load
Power factor: 1

Brochure-listed functions

Useful functions, stated with their limits visible.

These are model-page claims in the supplied brochure. Availability, firmware behavior and accessories should be checked against the current supplied configuration.

Check project compatibility →

CT anti-backflow

Zero feed-in protection is listed; confirm CT selection, placement and commissioning method.

200% surge for 5 seconds

7200VA peak output is listed; verify the actual starting profile of motors and other critical loads.

Peak shaving and tariff management

Operating schedules still depend on metering, grid policy and the available configuration.

Dry-contact generator control

The brochure lists dry-contact control. Generator sizing and charge behavior require project review.

Battery-less operation

PV plus grid direct supply is listed; available behavior depends on solar and grid conditions.

Before specification

Five checks remain project-specific.

A model page narrows the choice; it does not replace system design, local compliance review or the current installation manual.

PV string Voc

Calculate cold-weather open-circuit voltage and keep it within the documented maximum.

Battery and BMS

Confirm model, voltage window, current, communication protocol, firmware and cable pinout.

Backup loads

List continuous loads, the largest surge, transfer sensitivity and required backup duration.

Grid and protection

Confirm country, service voltage, earthing, isolation, protection and anti-islanding requirements.

Documents

Request the current datasheet, manual and applicable certificate scope for the target market.

Certification note

The brochure specification table references CE (IEC 62109-1, -2), IEC 61000 and C2. This website does not present those references as independently verified certificates. Request the applicable certificate, model scope and revision before relying on a compliance claim.

Model FAQ

Answers tied to ELE SPI2436V120-500.

The supplied model page controls the answers below. Project suitability still depends on the complete electrical design.

Yes. The brochure lists a 24V nominal platform, 28.8Vdc rated battery voltage and a 20-33Vdc battery range. Confirm the exact battery and BMS separately.

Model-specific inquiry

Confirm the system around the model.

Send the country, PV strings, battery model, backup loads, quantity and documents required. The inquiry form will prefill this model number.

Request ELE SPI2436V120-500 data →