Is the ELE SPI4862V100-500P a 48V battery inverter?

Yes. The supplied brochure lists a 48V nominal platform, 51.2Vdc rated battery voltage and a 40-60Vdc battery voltage range. Exact battery and BMS compatibility still requires confirmation.

Can the ELE SPI4862V100-500P operate in parallel?

Yes. The brochure lists support for one to six parallel units. The final parallel design, phase arrangement, protection and communication layout must follow current model documentation.

What PV input is documented for the ELE SPI4862V100-500P?

The brochure lists 6500W maximum DC input power, 500V maximum DC input voltage, a 90-500V PV input range, a 90-450V MPPT range and one MPPT channel with 27A maximum input current.

What backup transfer and surge values are listed?

The specification table lists a typical transfer time of 10 milliseconds and peak output of 12000VA for 5 seconds. The final load and surge design must be checked for the project.

EU series · parallel residential inverter

ELE SPI4862V100-500P6.2kW output that scales on a 48V battery platform.

Documented for 230Vac single-phase residential systems with 6.5kW maximum DC input, one 27A MPPT channel and support for one to six parallel units.

Request model datasheet →Review specifications ↓

EU seriesSingle-phase48V battery1-6 parallel

Representative white ELECNO residential hybrid inverter family housing with display

PV input6.5kW500V maximum DC voltage

Battery48V40-60Vdc operating range

Family visual · confirm image and current document revision for the exact supplied unit

6.2kWRated AC output

230VacSingle-phase output

1 × 27AMPPT channel

1-6Parallel units

Selection answer

A 48V single-phase model with an expansion path.

The model fits a documented 230Vac single-phase branch where 6.2kW rated output, a 48V battery platform and future parallel expansion are relevant. Parallel capability is a system-design option, not permission to connect units without the current manual.

Start with 230Vac service

Rated output is single-phase L+N+PE at 50/60Hz.

Confirm country and grid rules

Check the 48V window

The brochure lists 40-60Vdc and lead-acid or lithium battery types.

Verify BMS and current

Keep PV inside limits

Maximum DC input is 6.5kW; PV Voc must remain below 500V.

Cold-weather Voc controls

Engineer parallel expansion

One to six units are listed, but grouping, protection and communications must be confirmed.

Use current model documents

Documented operating paths

A larger battery platform, coordinated across four energy paths.

The brochure lists on-grid, off-grid and battery-less operation. Final wiring, protection, parallel arrangement and operating modes must follow the current installation documentation.

System overviewELE SPI4862V100-500P

01 / Solar input

PV array

90-500V input range

90-450V MPPT range

PV → inverter

02 / Energy conversion

Hybrid inverter

ELE SPI4862V100-500P

Representative ELECNO inverter family housing

6200Wrated output

12000VA peak for 5s

Family visual · exact unit may vary

03 / Energy storage

48V battery

100A max charge

135A max discharge

Battery ↔ inverter

04 / AC connection

Loads / grid

230Vac single-phase

10ms typical transfer

Grid input · load output

Functional overview, not an installation wiring diagram. Follow the model-specific manual for terminal assignments and protection.

Model specification

Every published value tied to ELE SPI4862V100-500P.

Values below are transcribed from the supplied July 2026 neutral brochure. Confirm the latest datasheet revision before procurement, string design, parallel planning or installation.

DC input / PV

Maximum DC input power: 6500W
Maximum DC input voltage: 500V
Start voltage: 120V
PV input voltage range: 90-500V
MPPT voltage range: 90-450V
MPPT channels: 1
Maximum MPPT input current: 27A
Maximum PV charging current: 100A

AC input and output

AC input range: 170-280Vac
Input frequency range: 47-55Hz / 57-65Hz
Maximum AC input current: 40Aac
Maximum AC charge current: 80Adc
Rated AC output power: 6200W
Maximum AC output power: 6200VA
Peak power / duration: 12000VA / 5s
Rated output voltage: 230Vac
Output frequency: 50/60Hz
Connection: L+N+PE

Battery parameters

Rated battery voltage: 51.2Vdc
Minimum start voltage: 44V
Battery voltage range: 40-60Vdc
Battery type: Lead-acid / lithium
Maximum charge / discharge: 100A / 135A
Charge voltage range: 40-60Vdc
Battery-less operation: Yes
PV / grid battery activation: Listed feature

General data

Dimensions (W × D × H): 428 × 280 × 110mm
Weight: 8.2kg
Operating temperature: -10°C to 55°C
Derating: Above 45°C
Storage temperature: -25°C to 60°C
Humidity range: 5%-95%
Cooling: Forced air, variable speed
Protection class / noise: IP21 / ≤60dB

Protection and transfer

Grid overload protection: Circuit breaker
Grid breaker rating: 40A
AC reverse feed protection: Yes
Battery short-circuit protection: Fuse
AC output short-circuit protection: Yes
Wiring protection: Yes
Transfer time: 10ms typical
CT anti-backflow: Yes

Interfaces and scale

Communication ports: USB / RS485 / Wi-Fi
Dry contact control: Yes
Remote diagnostics / OTA: Yes
Parallel units: 1-6
Maximum altitude: 4000m
No-derating altitude: ≤2000m
Maximum efficiency: >94.5% battery to load
Power factor: 1

Brochure-listed functions

Parallel capability supported by practical control functions.

These functions are listed on the supplied model page. Availability, firmware behavior, parallel accessories and configuration should be checked against the current supplied package.

Check project compatibility →

One to six parallel units

The expansion range is documented; phase grouping, protection and communication layout still require engineering review.

12000VA peak for 5 seconds

The exact specification-table value is used here. Verify the starting profile of motors and other critical loads.

CT anti-backflow

Zero feed-in protection is listed; confirm CT selection, placement and commissioning method.

Peak shaving and tariff management

Operating schedules depend on metering, utility rules, battery limits and the available configuration.

Generator and battery-less modes

Dry-contact generator control and PV plus grid direct supply are listed; confirm project behavior before design.

Before specification

Parallel-ready still requires a complete system design.

A model page narrows the choice; it does not replace current parallel instructions, local compliance review or installation documentation.

PV string Voc

Calculate cold-weather open-circuit voltage and keep it within the documented maximum.

Battery and BMS

Confirm model, voltage window, current, protocol, firmware and communication cable pinout.

Parallel architecture

Confirm unit count, phase grouping, master logic, protection, wiring and communication accessories.

Loads and grid

Document continuous loads, peak loads, grid rules, protection and anti-islanding requirements.

Documents

Request the current datasheet, manual and applicable certificate scope for the target market.

Certification note

The brochure specification table references CE (IEC 62109-1, -2), IEC 61000 and C2. This website does not present those references as independently verified certificates. Request the applicable certificate, model scope and revision before relying on a compliance claim.

Model FAQ

Answers tied to ELE SPI4862V100-500P.

The supplied model page controls the answers below. Project suitability still depends on the complete electrical and parallel design.

Yes. The brochure lists a 48V nominal platform, 51.2Vdc rated battery voltage and a 40-60Vdc battery range. Confirm the exact battery and BMS separately.

Model-specific inquiry

Define the first unit and the expansion path.

Send the country, PV strings, battery model, loads, planned parallel count, quantity and documents required. The inquiry form will prefill this model number.

Request ELE SPI4862V100-500P data →